Research articles

By Mr. Prasanta K Choudhury , Prof. Padala N Murthy , Prof. Niraj K Tripathy , Mrs. Rajeshree Panigrahi , Mrs. Saiprasanna Behera
Corresponding Author Mr. Prasanta K Choudhury
Pharmaceutical Technology, Royal College of Pharmacy and Health Sciences, - India 760002
Submitting Author Mr. Prasanta K Choudhury
Other Authors Prof. Padala N Murthy
Royal college of Pharmacy and Health Sciences, Berhampur, - India

Prof. Niraj K Tripathy
Department of Zoology, Berhampur University, Berhampur, - India

Mrs. Rajeshree Panigrahi
Department of Pharmaceutics, Royal College of Pharmacy and Health Sciences, - India

Mrs. Saiprasanna Behera
Department of Pharmacology, Royal College of Pharmacy and Health Sciences, - India


Metronidazole, Compatibility, Polymers, UV Spectrophotometric methods, FTIR, Colonic drug delivery, Quasiemulsification Solvent-diffusion technique

Choudhury PK, Murthy PN, Tripathy NK, Panigrahi R, Behera S. Investigation of Drug Polymer Compatibility: Formulation and Characterization of Metronidazole Microspheres for Colonic Delivery.. WebmedCentral PHARMACEUTICAL SCIENCES 2012;3(3):WMC003128
doi: 10.9754/journal.wmc.2012.003128

This is an open-access article distributed under the terms of the Creative Commons Attribution License(CC-BY), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Click here
Submitted on: 04 Mar 2012 06:29:47 AM GMT
Published on: 05 Mar 2012 01:34:56 PM GMT


For the design and development of any novel formulation, assessment of compatibility of drug with excipients by different techniques such as thermal and isothermal stress testing are recommended. During pre-formulation studies common methods like UV-Spectrophotometric methods, FTIR are used for the study of compatibility. In the present investigation drug-excepient compatibility study of was conducted for metronidazole with ethyl cellulose to formulate microspheres by using different ratio of drug: polymer for colonic delivery. The drug and polymer mixtures were stored at 50 °C for 2 weeks. The samples were then characterized using UV Spectrophotometric method, FTIR. The results show that metronidazole was compatible with ethyl cellulose; hence ethyl cellulose can be used for formulation of metronidazole microspheres. Microspheres were prepared by modified Novel Quasiemulsification solvent-diffusion method to study the effect of ethyl cellulose on drug release with different proportions of metronidazole and ethyl cellulose. Prepared microspheres of ethyl cellulose were evaluated for size, morphology, sphericity study, percentage yield, loose surface crystal study, drug content and entrapment efficiency. In vitro drug release study was conducted by buffer change method to mimic Gastro Intestinal environment. The investigations revealed that microspheres prepared with metronidazole: ethyl cellulose ratio (1:2) show only 19.394 ±0.67% drug release in first 5 hours and 46.72 ±0.69% in 12 hours, which prove the potentiality of ethyl cellulose for colonic delivery of drugs. 


Drug excepient compatibility is one of the important parameter to be considered during preformulation studies, which can alter the physicochemical properties and bioavailability of the drugs. To develop effective, safe and stable formulation drug excepient compatibility is an important process and it helps in the selection of right excepient. Despite of the importance of the drug excepient compatibility tests, there is no universally accepted protocol for this purpose. Infrared spectroscopy is a technique based on the vibrations of the atoms of a molecule. An infrared spectrum is commonly obtained by passing infrared radiation through a sample and determining what fraction of the incident radiation is absorbed at a particular energy. The energy at which any peak in an absorption spectrum appears corresponds to the frequency of a vibration of a part of a sample molecule[8]. UV Spectrophotometric method is common analytical techniques used to determine the drug content of most of the drugs.

In the present study, the drug excepient compatibility of the metronidazole with various ethyl cellulose was determined by as a part of an ongoing project on the development of metronidazole microspheres. FTIR and UV Spectrophotometric methods were used for the characterization study.

Colonic diseases are important causes of death by protozoal infections in the developing world and even in advanced countries. Hence, in the present study metronidazole (MNZ) was selected as a model drug which has extremely broad spectrum of protozoal and antimicrobial activity. It is clinically effective in colonic diseases, both locally and systemically[2].  Based on the observations, an attempt has been made to develop ethyl cellulose microspheres for metronidazole by modified Novel Quasiemulsification solvent-diffusion method to deliver active molecule to the colonic region, which combines pH-dependent and controlled drug release properties.



M/s Diamond Drugs Pvt Ltd, Howrah, WB, India, generously supplied metronidazole as a gift sample. Ethyl cellulose-LR (EC-LR), Span 80 and Tween 80 were procured from S.D. fine-chem. Ltd., Mumbai, India. Light liquid paraffin was obtained from Loba Chemie Ltd, Mumbai. All other solvents and reagents were of analytical grade procured from local suppliers.


The drug and polymer mixtures of metronidazole with various polymers prepared at different ratio. The drug and ethyl cellulose were individually weighed in a 10 ml glass vial and mixed on a vortex mixer for 2 min. In each of the vials, 10% of the ethanol-water was added and the drug-excepient blend was further mixed. Each vial was sealed Teflon-lined screw cap and stored at 50 °C for 2 weeks. These samples were periodically examined for any change of unusual color change. 

Characterization by UV spectrophotometer

The samples on the first day, after 1 week and 2 weeks were withdrawn from storage and analyzed by UV spectrophotomer. The drug content was determined at initial and stored samples in triplicate. An accurately weighed amount of the drug-polymer mixture was taken and suitably dissolved in ethanol. The sample was analyzed after making appropriate dilutions using UV spectrophotometer at 311 nm against blank

Fourier transforms infrared radiation measurement (FT-IR)

The FT-IR spectra acquired were taken from dried samples. A FT-IR (Shimdzu-840-os, Japan) was used for the analysis in the frequency range between 4000 and 400 cm-1, with 4cm-1 resolution.


Metronidazole loaded ethyl cellulose (EC) microspheres were prepared by Novel Quasiemulsification solvent-diffusion method[3]. A solution of EC in acetone (2%, 4% and 8%) containing drug (1g) was added to liquid paraffin containing emulgent (Span 80), while stirring, at a speed of 1500 rpm. The emulsion was stirred for 5 to 6 hours at 25°C to 30°C. Subsequently, a suitable amount of petroleum ether was added to the dispersion. The microspheres suspended in liquid paraffin were filtered and collected. The resultant microspheres were washed with water followed by petroleum ether to remove traces of liquid paraffin. The microspheres were dried at ambient temperature and desiccated under vacuum. The batch was coded as ECQ.

Characterization of Microspheres

The prepared microspheres were characterized by evaluating following parameters like % yield, particle size analysis, Determination of Shape and Sphericity, drug content, Drug Entrapment efficiency (DEE %), Loose surface crystal study and In Vitro Drug Release from Microspheres (data disclosed in table 4 ). 

Results and discussion

Drug content estimation

The drug and polymer mixture was physically observed at different intervals. No characteristic color change was observed. The assay of the drug polymer mixtures were found good. Assay value of 99.12 to 100.1 was observed at initial. Good correlation was observed with the samples of drug polymer mixtures stored at 50 °C for 2 weeks. This clearly indicates the stable nature of the metronidazole with cellulose polymers (Table 1).

Fourier transforms infrared radiation measurement (FT-IR)

The characteristic band peaks acquired were taken from the prepared drug-polymer mixtures. The interaction study between drug and polymer was evaluated. The characteristics peak of the drug was found at wave numbers 743.58 cm-1, 1070.53 cm-1, 1160.22 cm-1, 1187.23 cm-1, 1264.38 cm-1 and 1536.35 cm-1, these are almost same as reported in the monograph for metronidzole.

Formulation and characterization of Microspheres

Metronidazole (MNZ) loaded ethyl cellulose microspheres were successfully prepared by the Novel Quasiemulsification solvent-diffusion method using light liquid paraffin in the external phase. The effect of drug polymer ratios was analyzed in order to optimize the formulation. It was observed that by changing drug: polymer ratio the shape, size as well as the entrapment efficiency of formulations considerably influenced. The yield of microencapsulation process was increased with increase in ethyl cellulose concentration in the formulations. The microspheres were discrete and fairly spherical in shape while the surface roughness was slightly increased with the incorporation of the drug. Excellent microspheres were produced when the process was carried out with drug: ethyl cellulose ratio 1:2 while the shape of the microspheres was distorted and some of them fused with each other when ethyl cellulose ratio was decreased. The drug particles appeared on the surface of the microspheres when they were prepared with drug: polymer ratio 2:1.

Particle size of the microspheres was determined using optical microscopic method. Mean particle size was found to be 21.76 ± 3.33µm in case of microspheres having drug: ethyl cellulose ratio 2:1 while it was significantly increased to 34.8±2.45µm with drug: ethyl cellulose ratio (1:5) (Table 4). The size of the microspheres is controlled by the size of the dispersed droplets of Ethyl cellulose in liquid paraffin. When the concentration of the ethyl cellulose in the formulation was increased, there was increment in the size of dispersed droplets that resulted in the formation of microspheres having bigger particle size. With increase in the polymer ratio in the formulations the mean particle size of all the formulations increased (Table 4). All the microsphere formulations have the circularity factor nearest to “1” which proves that they are almost spherical in shape (Table 4). The microspheres showed better entrapment efficiency with increase in polymer ratio. Highest entrapment efficiency was observed for the formulation ECQ3 99.29±4.71 (Table 4). As the drug: polymer ratio was increased from 2:1 to 1:2 the surface entrapment of the drug on the microsphere surfaces was decreased which is suitable for the colonic delivery of the drugs and the surface entrapment of drug shows a less amount of drug lose due to the process variables but with further increase in polymer ratio the surface entrapment was increased. It may be due to the dispersion of the drug in polymer layer more evenly rather than entrapped into to the polymer layer.

The microspheres were subjected to in-vitro drug release rate studies in SGF (pH 1.2) for 1 hour and in mixture of SGF and SIF (pH 4.5) for the next 2 hours in order to investigate the capability of the formulation to withstand the physiological environment of the stomach and small intestine. The MNZ percent released from the microspheres of drug: ethyl cellulose ratio 1:2 after 12 h studies is 46.72 %. The amount of MNZ released during first 5 h studies was found to be 29.993 ± 1.22 %, 16.342 ± 1.13 %, 19.790 ± 0.48 %, 14.495 ± 0.77 %, 19.394 ± 0.67 % and 10.003 ± 0.88 % for ECQ1, ECQ2, ECQ3, ECQ4, ECQ5, and ECQ6 respectively (Figure. 6) which attests the ability of ethyl cellulose to remain intact in the physiological environment of stomach and small intestine. The little amount of the drug, which is released during 5 h release rate studies, is due to the presence of un-entrapped drug on the surface of the microspheres. The release of the drug was much faster during the 6-12 hour study period. It is due to the fact that during the initial period (0-5 h) the strength of the barrier was too high to be broken and during 6-12 hour period the network was somewhat loosened which facilitated the release of drug (Figure 9.). Basing on all the evaluation parameters studied, like %yield, particle size, sphericity, surface entrapment, entrapment efficiency and in vitro drug release the formulation ECQ3 was found to be the ideal formulation.

Summary and Conclusion

No characteristic color change was observed during the storage at 50 °C for 2 weeks. Good correlation was observed at initial and after 2 weeks of Isothermal stress testing (IST). This clearly indicates the stable nature of metronidazole with the cellulose polymers used in the preset study. FTIR study of the initial and IST clearly indicates the stable nature of the metronidazole. This study is definitely useful for the preparation of metronidazole microsphere formulations.

The efficacy of the ethyl cellulose was evaluated for colon targeted drug delivery by fabricating it into microspheres. The microspheres of ethyl cellulose prepared by modified quasiemulsion method were capable of providing protection to the drug in the hostile environment of upper gastrointestinal tract and released the drug at the target site. The in vitro drug release studies of ethyl cellulose microspheres revealed that very less amount of the drug was released in the physiological environment of stomach and small intestine. Hence these data attests the potentiality of ethyl cellulose for colon-specific delivery of the drugs.


We express our sincere thanks to Royal College of Pharmacy and Health Sciences, Berhampur, Orissa for their support in providing the facilities to complete the work. We also extend our thanks to M/s Diamond drugs Pvt Ltd, Howrah, W.B. for providing us gift samples of metronidazole.


1. Rubinstein A, Approaches and opportunities in colon-specific drug delivery. Crit Rev Ther Drug Carrier Syst. 1995; 12(2-3): 101-49.
2. Chourasia MK and. Jain SK. Design and Development of Multiparticulate System for Targeted Drug Delivery to Colon, Drug Delivery. 2004; (11):201–7
3. Ranga Rao KV, Devi KP. Swelling controlled release systems: recent developments and application. Int J Pharm. 1988; 48:1-16.
4. Chourasia MK, Jain SK. Pharmaceutical appraoaches to colon targeted drug delivery systems. J Pharm Pharmaceut Sci ( 2003; 6(1): 33-66
5. Ashford M, Fell JT, Attwood D, Sharma H and Woodhead P.J. An in vivo investigation into the suitability of pH-dependent polymers for colonic targeting. Int J Pharm, 1993; 95: 193-9
6. Mishra B, et al. Development of chitosan-alginate microcapsules for colon specific delivery of metronidazole. Indian Drugs, 2003; 40 (12): 695-700.
7. Chourasia MK and Jain SK. Potential of Guar Gum Microspheres for Target Specific Drug Release to Colon. Journal of Drug Targeting. August 2004; 12 (7): 435–442
8. Gohel MC, Parikh RK, Amin AF, Surati AK. Preparation and Formulation Optimization of Sugar Cross linked gelatin Microspheres of Diclofenac Sodium. Indian J. Pharm Sci., 2005; 67(5): 575-81
9. Chowdary KPR, Rao YS. Preparation and evaluation of mucoadhesive microspheres of Indomethacin. Indian J. Pharm Sci. 2003; 65(1): 49-52
10. Kawashima et al. Preparation and in vitro characterization of Eudragit RL100 microsphere containing 5 –fluorouracil. Indian J. Pharm Sci. 2003; 60(2): 107-9
11. Chourasia MK, Jain SK. Design and Development of Multiparticulate System for Targeted Drug Delivery to Colon. Drug Delivery. 2004; 11: 201–7
12. Shabaraya AR, Narayanacharyulu R. Design and evaluation of chitosan microspheres of metoprolol tartarate for sustained release. Indian J. Pharm Sci. 2003; 65(3): 250-2
13. Bhumkar DR, Maheswari M, Patil VB and Pokharkar VB. Studies on effect of variabilities by response surface methodology for Naproxen microspheres. Indian drugs. 2003; 40 (8): 455-461
14. Mishra B, Jayanta B, Sankar C. Development of chitosan-alginate microcapsules for colon specific delivery of Metronidazole. Indian drugs. 2003; 40(12): 695-700
15. Abu-Izza K, Garcia LC and Robert D. Preparation and evaluation of zidovudine loaded sustained release microspheres: optimization of multiple response variables. J Pharm. Science. 1996; 85(6): 572-4
16. Danbrow M, Samuelov Y, Zero order drug delivery from double –layered porous films: release rate profiles from ethyl cellulose, hydroxypropyl cellulose and polyethylene glycol mixtures, Journal of Pharmacy and pharmacology. 1980; 32: 463-470.
17. Higuchi T, Mechanism of sustained-action medication: theoretical analysis of rate of release of solid drugs dispersed in solid matrices. Journal of pharmaceutical sciences. 1963; 52:1145-1149
18. Korsmeyer RW, Gurny R, Doelker EM, Buri P, Peppas NA. Mechanism of solute release from porous hydrophilic polymers. International Journal of Pharmacy. 1983; 15: 25-35.

Source(s) of Funding


Competing Interests



This article has been downloaded from WebmedCentral. With our unique author driven post publication peer review, contents posted on this web portal do not undergo any prepublication peer or editorial review. It is completely the responsibility of the authors to ensure not only scientific and ethical standards of the manuscript but also its grammatical accuracy. Authors must ensure that they obtain all the necessary permissions before submitting any information that requires obtaining a consent or approval from a third party. Authors should also ensure not to submit any information which they do not have the copyright of or of which they have transferred the copyrights to a third party.
Contents on WebmedCentral are purely for biomedical researchers and scientists. They are not meant to cater to the needs of an individual patient. The web portal or any content(s) therein is neither designed to support, nor replace, the relationship that exists between a patient/site visitor and his/her physician. Your use of the WebmedCentral site and its contents is entirely at your own risk. We do not take any responsibility for any harm that you may suffer or inflict on a third person by following the contents of this website.

1 review posted so far

Assessment of submitted article
Posted by Dr. Oliver Grundmann on 01 May 2012 12:43:31 PM GMT

Dear Dr. Oliver Grundmann Thanks for your comments and review on our article. We have revised the article and added some descriptions as per your suggestions. Hope this time we may satisfy the readers... View more
Responded by Mr. Prasanta K Choudhury on 02 May 2012 02:44:29 AM GMT

0 comments posted so far

Please use this functionality to flag objectionable, inappropriate, inaccurate, and offensive content to WebmedCentral Team and the authors.


Author Comments
0 comments posted so far


What is article Popularity?

Article popularity is calculated by considering the scores: age of the article
Popularity = (P - 1) / (T + 2)^1.5
P : points is the sum of individual scores, which includes article Views, Downloads, Reviews, Comments and their weightage

Scores   Weightage
Views Points X 1
Download Points X 2
Comment Points X 5
Review Points X 10
Points= sum(Views Points + Download Points + Comment Points + Review Points)
T : time since submission in hours.
P is subtracted by 1 to negate submitter's vote.
Age factor is (time since submission in hours plus two) to the power of 1.5.factor.

How Article Quality Works?

For each article Authors/Readers, Reviewers and WMC Editors can review/rate the articles. These ratings are used to determine Feedback Scores.

In most cases, article receive ratings in the range of 0 to 10. We calculate average of all the ratings and consider it as article quality.

Quality=Average(Authors/Readers Ratings + Reviewers Ratings + WMC Editor Ratings)